Mountaineer 2WD V8-4.6L VIN 8 (2006)
4.
Align the retention bracket over the cushion side shield spring clip mounting boss hole and attach the cushion side shield. (Figure 2)
NOTE
DO NOT REPLACE THE OUTSIDE CUSHION SHIELD IF THE FRONT SPRING CLIP IS LOOSE, AS THE NEW BRACKET AND SCREW
WILL PROVIDE THE PROPER RETENTION.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
072510A
2006-2008 Explorer,
0.2 Hr.
Mountaineer, 2007-2008
Sport Track: Install Outside
Seat Cushion Shield
Bracket One Seat
072510B
2006-2008 Explorer,
0.3 Hr.
Mountaineer, 2007-2008
Sport Track: Install Outside
Seat Cushion Shield
Bracket Both Seats
DEALER CODING
CONDITION
BASIC PART NO.
CODE
7862900
07
Disclaimer