Mercury Workshop Service and Repair Manuals > Mountaineer 2WD V8-4.6L VIN 8 (2006) > Engine, Cooling and Exhaust | Engine | Timing Components | Variable Valve Timing | Variable Valve Timing Solenoid | Component Information

Tune-up and Engine Performance Checks > < Variable Camshaft Timing (VCT) Valve 1|Page 3297

Page 1

Variable Valve Timing Solenoid: Service and Repair

VARIABLE CAMSHAFT TIMING (VCT) OIL CONTROL SOLENOID

Removal and Installation

1. Disconnect the battery ground cable.
2. Disconnect the variable camshaft timing (VCT) oil control solenoid electrical connector.
3. Remove the grommet.
4. Remove the bolt and the VCT oil control solenoid.

To install, tighten to 5 Nm (44 lb-in).

5. To install, reverse the removal procedure

Engine, Cooling and Exhaust
Engine
Timing Components
Variable Valve Timing
Variable Valve Timing Solenoid
Component Information
Service and Repair

Tune-up and Engine Performance Checks > < Variable Camshaft Timing (VCT) Valve 1|Page 3297

Mercury Workshop Service and Repair Manuals

Mountaineer 2WD V8-4.6L VIN 8 (2006)

Engine, Cooling and Exhaust Engine Timing Components Variable Valve Timing Variable Valve Timing Solenoid Component Information Service and Repair

Engine, Cooling and Exhaust Engine Timing Components Variable Valve Timing Variable Valve Timing Solenoid Component Information Service and Repair

Engine, Cooling and Exhaust
Engine
Timing Components
Variable Valve Timing
Variable Valve Timing Solenoid
Component Information
Service and Repair

Engine, Cooling and Exhaust
Engine
Timing Components
Variable Valve Timing
Variable Valve Timing Solenoid
Component Information
Service and Repair