Mountaineer 2WD V8-4.6L VIN 8 (2006)
All vehicles
8. Remove the 2 suction accumulator fitting nuts and disconnect the fittings.
-
Discard the O-ring seals.
-
To install, tighten to 8 Nm (71 lb-in).
9. Remove the suction accumulator bracket bolt and suction accumulator.
10. To install, reverse the removal procedure.
-
Install new O-ring seals.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
11. Evacuate, leak test and charge the refrigerant system.