Mountaineer 2WD V8-4.6L VIN 8 (2006)
inspected according to the functional inspection procedures. Failure to install a new belt and retractor assembly could increase the risk of injury in
collisions.
1. Remove the rear quarter trim panel.
2. Remove the bolt and D-ring.
-
To install, tighten to 40 Nm (30 lb-ft).
3. Remove the bolt and safety belt retractor.
-
To install, tighten to 40 Nm (30 lb-ft).
4. To install, reverse the removal procedure.
5. Check the active restraint system for correct operation.