Mountaineer 2WD V8-4.6L VIN 8 (2006)
5. Tighten the screws in a crisscross sequence.
^
Tighten to 11 Nm (8 ft. lbs.).
6. Install the fluid drain plug.
^
Tighten to 26 Nm (19 ft. lbs.).
7. Partially fill the transmission.
5. Tighten the screws in a crisscross sequence.
^
Tighten to 11 Nm (8 ft. lbs.).
6. Install the fluid drain plug.
^
Tighten to 26 Nm (19 ft. lbs.).
7. Partially fill the transmission.