Mountaineer 2WD V8-4.6L VIN 8 (2006)
5. NOTE: The driveshaft flange yoke fits tightly on the pinion flange pilot. Never hammer on the driveshaft or any of its components to disconnect
the driveshaft flange from the pinion flange.
Use a suitable tool and pry only in the area shown to separate the driveshaft flange yoke from the pinion flange.
6. CAUTION: The driveshaft flange fits tightly on the pinion flange pilot. To make sure that the driveshaft flange seats squarely on the pinion
flange, tighten the driveshaft flange bolts evenly in a star pattern.
CAUTION: If new driveshaft flange bolts are not available, coat the threads of the original driveshaft flange bolts with threadlock and sealer.
To install, reverse the removal procedure.
