Mountaineer 4WD V6-4.0L VIN E (1999)
![background image](/mercury/mountaineer_4wd/v6-4.0l_vin_e/Page-2537002.png)
5. Remove the seat cushion flex mat.
1. Unhook the rear flex mat J-clip.
2. Unhook the front flex mat J-clip.
3. Remove the seat cushion flex mat.
NOTE: Use the brackets on the seat cushion frame to obtain the necessary leverage to unhook the rear flex mat J-clip.
ASSEMBLY
1. Install the seat cushion flex mat.
1. Position the seat cushion flex mat.
2. Hook the front flex mat J-clip.
3. Hook the rear flex mat J-clip.
CAUTION: The flex mat J-clips must be installed with the openings facing down or the seat cushion will be damaged.
NOTE: Use the brackets on the seat cushion frame to obtain the necessary leverage to hook the rear flex mat J-clip.
2. Position the seat cushion trim cover on the seat cushion hook and loop strips.