mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

ABOUT US
40% Portion of Rear 60/40 Split Bench|Page 11468 > < 40% Portion of Rear 60/40 Split Bench|Page 11466

Mountaineer 4WD V6-4.0L VIN E (1999)

Page 7
background image

12. Remove the power seat wiring harness.

1. Disconnect the pin-type retainers.
2. Remove the power seat wiring harness.

13. Remove the flexilator.

1. Remove the flexilator springs.
2. Remove the flexilator.

14. Remove the lumbar support adjusting pump.

1. Remove the bolt.
2. Remove the lumbar support adjusting pump.

15. Remove the seat backrest recliner roll pins and remove the seat backrest recliners.

40% Portion of Rear 60/40 Split Bench|Page 11468 > < 40% Portion of Rear 60/40 Split Bench|Page 11466