Mountaineer 4WD V6-4.0L VIN E (1999)
![background image](/mercury/mountaineer_4wd/v6-4.0l_vin_e/Page-2540011.png)
1. Connect the seat backrest recliner actuator.
2. Install the screws.
^
Tighten until the screws are fully seated.
13. Assemble the seat.
NOTE: Be sure to read and follow all air bag warnings.
Manual
DISASSEMBLY
1. Disassemble the manual front bucket seat.
2. Disconnect the seat cushion trim cover J-clips.
3. Remove the seat cushion trim cover.
^
Disconnect the seat trim cover from the hook and loop strips.
CAUTION: Use care when separating the seat cushion trim cover from the hook and loop strip or the hook and loop strip may be torn from the
seat cushion foam.
4. Remove the seat cushion.
^
Disconnect the front and rear J-clips.