Mountaineer 4WD V6-4.0L VIN E (1999)
Cruise Control Switch: Service and Repair
Without Remote Audio/Climate Controls
REMOVAL
1. Remove the driver side air bag module.
2. Remove the speed control actuator switches.
1
Remove the screws.
2
Disconnect the electrical connector then remove the speed control actuator switches.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
