Mountaineer 4WD V6-4.0L VIN E (1999)
5.
If the bracket is not damaged, inspect the solenoid for the affected date code (refer to the following Manufacturing Date Code Chart) and ID
marking (Figure 1, Views 1, 2, and 3). If the solenoid is one of the affected, replace it.
6.
Inspect the fluid pan for major contamination.
^
If contamination is minimal, clean the main control, but do not replace.
^
If major contamination is present, perform normal transmission overhaul as required, including main control replacement. Pay particular
attention to the condition of the friction plates. Repair as required.
