Mountaineer 4WD V6-4.0L VIN E (1999)
![background image](/mercury/mountaineer_4wd/v6-4.0l_vin_e/Page-1423001.png)
Shifter A/T: Service and Repair
Removal
1. Remove the ignition switch.
2. Remove the upper steering column shroud.
3. Remove the gearshift lever.
1
Disconnect the shift control selector lever harness connector.
2
Remove and discard the gearshift lever pin.
3
Remove the gearshift lever.
Installation
1. NOTE: The gearshift lever pin must be replaced whenever removed.
Follow the removal procedure in reverse order.