Mountaineer 4WD V6-4.0L VIN E (1999)
![background image](/mercury/mountaineer_4wd/v6-4.0l_vin_e/Page-1475004.png)
12. CAUTION: Support the main control valve body.
Remove the screws.
13. Remove the main control valve body.
Installation
1. Install the Valve Body Guide Pins into the transmission case.
1
Install the large guide pin (.248).
2
Install the small guide pin (.235).
2. NOTE: Make sure main control to case gasket is properly aligned.
Install new main control to case gasket.