Mountaineer 4WD V6-4.0L VIN E (1999)
20. Install the differential case in the differential housing.
21. NOTE: Repeat this step until obtaining a consistent reading.
Measure the total end play.
1. Install the special tool.
2. Force the differential case as far as possible away from the indicator. Position the indicator tip on the machined surface and adjust it to
measure full travel. With force still applied, set the indicator to zero.
3. Force the differential case as far as possible in the opposite direction.
4. Record the total end play reading on the Differential Bearing Shim Selection Procedure Worksheet, Line A in this procedure.
22. Remove the special tool, and remove the differential case.
1. Remove the special tool.
2. Remove the differential case.