Mountaineer 4WD V6-4.0L VIN E (1999)
11. Position the CV joint housing onto the CV joint.
12. NOTE: Remove any excess grease from the inboard halfshaft boot mating surface before positioning into place.
Position the inboard halfshaft boot and boot clamp.
1
Position the inboard halfshaft boot into place.
2
Position the boot clamp.
13. Insert a dulled screwdriver blade to relieve built-up air pressure in the halfshaft boot.
14. Use the CV Boot Clamp Installer to install the inboard boot clamps.
15. Install the front wheel halfshaft.
