mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Seals and Gaskets, Transfer Case|Service and Repair|Page 7168 > < Diagram Information and Instructions|Page 7164
Page 1
background image

Seals and Gaskets: Service and Repair

Special Tools

Removal 

WARNING:  The electrical power supply to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension
vehicle. This can be accomplished by turning off the air suspension switch located in the rear jack storage area. Failure to do so can result in
unexpected inflation or deflation of the air springs which can result in shifting of the vehicle during these operations.
 

1. With the transmission in neutral, raise and support the vehicle.

2. Index-mark the rear output flange and the driveshaft yoke.

3. Remove the four bolts.

Seals and Gaskets, Transfer Case|Service and Repair|Page 7168 > < Diagram Information and Instructions|Page 7164