Mountaineer 4WD V8-302 5.0L VIN P SFI (2000)
3. Install the front axle assembly.
4. Check the fluid level and fill the axle to specification.
-
Use Motorcraft SAE 80W90 Thermally Stable 4x4 Axle Lubricant meeting Ford specification WSP-M2C197-A.
5. Lower the vehicle.
6. If equipped with air suspension, reactivate the system by turning on the air suspension switch.
Disassembly and Assembly
Special Tools
Disassembly
1. Remove the front wheel halfshaft.
2. CAUTION: Be careful not to damage the halfshaft boot.
Remove the two inboard boot clamps.
3. Slide the inboard halfshaft boot off the inboard CV joint housing.