Workshop Manuals Factory service & repair Mercury
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Mercury Mountaineer 4WD V8-4.6L (2010)03 · Maintenance
03 · Maintenance

Alignment: Specifications (page 3 of 3)

Make
Mercury
Model
Mountaineer 4WD
Engine
V8-4.6L
Year
2010
Section
Alignment
MaintenanceSpecifications · page 3 of 3
background image

The vehicle toe setting:

-

affects tire wear and directional stability.

-

must be checked after adding aftermarket equipment, such as a snowplow.

Incorrect Thrust Angle (Dogtracking)

Wander

Wander is the tendency of the vehicle to require frequent, random left and right steering wheel corrections to maintain a straight path down a level road.

Shimmy

Shimmy, as observed by the driver, is large, consistent, rotational oscillations of the steering wheel resulting from large, side-to-side (lateral) tire/wheel
movements.

Shimmy is usually experienced near 64 km/h (40 mph), and can begin or be amplified when the tire contacts pot holes or irregularities in the road
surface.

Nibble

Sometimes confused with shimmy, nibble is a condition resulting from tire interaction with various road surfaces and observed by the driver as small
rotational oscillations of the steering wheel. For wheel and tire diagnosis, refer to Wheels and Tires.

Poor Returnability/Sticky Steering

Poor returnability and sticky steering is used to describe the poor return of the steering wheel to center after a turn or the steering correction is
completed.

Drift/Pull

Pull is a tugging sensation, felt by the hands on the steering wheel, that must be overcome to keep the vehicle going straight.

Drift describes what a vehicle with this condition does with hands off the steering wheel.

-

A vehicle-related drift/pull, on a flat road, will cause a consistent deviation from the straight-ahead path and require constant steering input in the
opposite direction to counteract the effect.

-

Drift/pull may be induced by conditions external to the vehicle, such as wind or road camber.

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

Parts & tools for this job For 2010 Mercury Mountaineer 4.6L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.