Mountaineer AWD V6-4.0L (2008)
11. Remove the 2 latch nuts and separate the latch assembly.
-
To install, tighten to 40 Nm (30 lb-ft).
12. NOTE: On assembly, route the cable as shown.
Remove the riser attachment cable and the latch assembly.
13. Remove the torsion rod and the cushion pad support.
14. Remove the front spring hinge bolts, springs and seat cushion frame assembly.
-
To install, tighten to 23 Nm (17 lb-ft).
15. To assemble, reverse the disassembly procedure.
Seat Cushion - Third Row
SEAT CUSHION - THIRD ROW