mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Camshaft, Lifters and Push Rods > < Compression Check|Specifications|Page 1980
Page 2
background image

Compression Pressure Limit Chart (Part 2)

If one or more cylinders read low, squirt approximately one tablespoon of engine oil on top of the pistons in the low-reading cylinders. Repeat the
compression pressure check on these cylinders.

Compression Test - Interpreting Compression Readings 

1. If compression improves considerably, piston rings are faulty.
2. If compression does not improve, valves are sticking or seating incorrectly.
3. If 2 adjacent cylinders indicate low compression pressures and squirting oil on each piston does not increase compression, the head gasket may be

leaking between cylinders. Engine oil or coolant in cylinders could result from this condition.

Use the Compression Pressure Limit Chart when checking cylinder compression so that the lowest reading is at least 75% of the highest reading.

Camshaft, Lifters and Push Rods > < Compression Check|Specifications|Page 1980