Mountaineer AWD V6-4.0L (2008)
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the LH quarter trim panel.
3. Remove the 2 auxiliary line floorpan bracket nuts.
-
To install, tighten to 8 Nm (71 lb-in).
4. Remove the 2 auxiliary heater core and evaporator core housing bolts.
-
To install, tighten to 6 Nm (53 lb-in).
5. Remove the auxiliary heater core and evaporator core housing nut.
-
To install, tighten to 6 Nm (53 lb-in).