Mountaineer AWD V6-4.0L (2008)
E3-E4
Test F: The Occupant Classification System Module (OCSM) Does Not Respond To The Scan Tool
PINPOINT TEST F: THE OCCUPANT CLASSIFICATION SYSTEM MODULE (OCSM) DOES NOT RESPOND TO THE SCAN TOOL
Normal Operation
The occupant classification system module (OCSM) communicates with the scan tool through the high speed controller area network (HS-CAN).
Circuits VDB04 (WH/BU) (HS-CAN +) and VDB05 (WH) (HS-CAN -) provide the network connection to the OCSM. The OCSM shares the
HS-CAN with the PCM, the transmission control module (TCM) (if equipped), the ABS module, the restraints control module (RCM), the 4X4
control module (if equipped) and the instrument cluster (IC). Voltage to the OCSM is supplied by circuit CBP17 (BN/GN). Ground is supplied by
circuit GD145 (BK/BU).
This pinpoint test is intended to diagnose the following:
-
Fuse
-
Wiring, terminals or connectors
-
OCSM
