mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Driver Air Bag Module|Page 7878 > < Driver Air Bag Module|Page 7876
Page 3
background image

3. Remove the 2 retainers and the auxiliary climate control headliner duct from the C-pillar.

All vehicles

4. NOTE:  Note the routing of the safety canopy module wiring harness for installation.

Disconnect the safety canopy module electrical connector and detach the connector and wiring pin-type retainers from the C-pillar.

Vehicles with moon roof

5. NOTE:  Note the position of the 2 rear moon roof drain hose routing clips for installation.

Disconnect the rear moon roof drain tube and detach the 2 rear moon roof drain hose routing clips.

Vehicles with entertainment system

6. NOTE:  Note the position and routing of the entertainment system wiring for installation.

Detach the 2 entertainment system wiring retainers and position wiring aside.

All vehicles

7. NOTE:  Note the locator tab on the front tether anchor bracket to the A-pillar sheet metal for installation.

Remove the bolt and the front tether anchor bracket.

8. Detach the 3 safety canopy module front tether pin-type retainers from the A-pillar.
9. Remove the safety canopy module front 2 bolts.

Driver Air Bag Module|Page 7878 > < Driver Air Bag Module|Page 7876