Mountaineer AWD V6-4.0L (2008)
15. Install the passenger side C-pillar trim panel.
-
Verify the safety belt retractor operates without excessive effort or binding.
All vehicles
16. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger seat side air bag module electrical connector.
17. Connect the passenger seat side air bag module electrical connector and then slide and engage the seat side air bag electrical connector locking
clip. Then attach the passenger seat side air bag module electrical connector to the seat track bracket.
18. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger air bag module electrical connector on the LH side.