Mountaineer AWD V6-4.0L (2008)
when removed or incorrect clamp load and damage to components may occur.
1. Remove the toe link.
2. Remove the parking brake cable bracket bolt.
^
To install, tighten to 10 Nm (89 lb-inch).
3. Remove and discard the trailing arm bolt.
^
To install, tighten to 300 Nm (222 lb-ft) at curb height.
4. Remove the 3 wheel knuckle bolts and the trailing arm.
^
Discard the bolts.
^
To install, tighten to 275 Nm (203 lb-ft).
5. To install, reverse the removal procedure.
