Mountaineer AWD V6-4.0L (2008)
![background image](/mercury/mountaineer_awd/v6-4.0l/Page-1580013.png)
9. Set the halfshaft assembled length to specifications.
1
Measure the entire assembly length.
2
Push in or pull out on the inner joint as necessary to adjust the halfshaft assembled length.
3
Hold the inner joint to prevent the assembled length from changing, and insert a soft, flat tool between the boot and the joint to equalize the
pressure.
10. Using the special tool, install both boot clamps.
11. Install the halfshaft assembly.