Mountaineer AWD V6-4.0L (2008)
Removal
1. Remove the RH and LH side A-pillar trim panels.
2. Remove the sun visors and retainers and, if equipped, the overhead console.
3. If equipped, remove the roof opening panel trim.
4. Remove the interior mirror.
5. Lower the front portion of the headliner.
6. Remove the cowl panel grille.
7. NOTE: LH shown, RH similar.
If equipped, disconnect the heated windshield electrical connectors.
-
Disconnect the connector.
-
Remove the connector from the retainer.
-
Remove the connector from the stud.
8. NOTE: LH shown, RH similar.
Lower the setting blocks.
-
Use a flat screwdriver to release the setting block and lower.
