Mountaineer AWD V8-4.6L (2010)
7. Release the hook-and-loop strips and invert the trim cover as high as it will go.
-
Pull the kneeling mechanism release handle and cable through the backrest trim cover opening.
8. From between the backrest foam pad and the backrest frame, reach up, pinch the ends together and remove the 2 head restraint guides.
9. Route out the safety belt and remove the backrest trim cover.
10. NOTE: Before installation, make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.
To install, reverse the removal procedure.
Seat Cushion Cover - Second Row, 40 Percent E-Z Entry
Seat Cushion Cover - Second Row, 40 Percent E-Z Entry
Removal and Installation
1. Remove the 2 screws and the latch feet release bar.
2. Release all the cushion trim cover retainers and pin-type retainers.
3. NOTICE: Use care when separating the cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the
cushion foam pad.
Release the hook-and-loop strips and remove the cushion trim cover from the cushion foam pad.
4. To install, reverse the removal procedure.
-
Make sure the lower anchor and tethers for children wires at the rear of the cushion frame are positioned through the cushion trim cover and
accessible for use after installation.
Seat Cushion Cover - Second Row, 60 Percent, E-Z Entry
Seat Cushion Cover - Second Row, 60 Percent, E-Z Entry
Removal
1. Remove the 2 screws and the latch feet release bar.
2. Release all the cushion trim cover retainers and pin-type retainers.
3. NOTICE: Use care when separating the cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the
cushion foam pad.
Release the hook-and-loop strips and separate the cushion trim cover from the cushion foam pad.
4. NOTE: Before installation, make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.
To install, reverse the removal procedure.
-
Make sure the lower anchor and tethers for children wires at the rear of the cushion frame are positioned through the cushion trim cover and
accessible for use after installation.
Seat Backrest Cover - Second Row, 40 Percent, Bench
Seat Backrest Cover - Second Row, 40 Percent, Bench