Mountaineer AWD V8-4.6L (2010)
13. Remove the 8 solenoid bracket bolts and the solenoid bracket.
14. Remove the Shift Solenoid E (SSE).
Installation
SSE
1. Install the SSE.
2. Position the solenoid bracket in place and install the 8 bolts.
-
Tighten to 6 Nm (53 lb-in).
3. NOTE: The TR switch pin must be aligned with the manual control valve during installation.
Position the TCM on the mechatronic assembly.
1. TCM
2. Mechatronic assembly
3. TR switch pin