Mountaineer AWD V8-4.6L SOHC VIN W (2002)
3. Attach the hook and loop fasteners at the rear of the seat cushion.
4. Position the safety belt buckle pretensioner. Install the two mounting bolts. Tighten to 40 Nm (30 lb-ft).
5. NOTE: Verify that the switch harness is routed and retained correctly.
Route the seat control switch wire harness as noted in the removal portion and connect the electrical connector.
6. Connect the heated seat switch.
7. Position the side trim to the seat and engage the side trim front retaining clip.