Mountaineer AWD V8-4.6L SOHC VIN W (2002)
Cruise Control Servo Cable: Service and Repair
REMOVAL
1. Remove the accelerator control splash shield.
2. Disconnect the speed control cable end from the throttle nail head by pushing upward.
3. Depress the locking tabs and remove the speed control cable from the accelerator cable bracket.
4. Remove the speed control servo from the inner fender.
1
Disconnect the electrical connector.
2
Remove the speed control servo bracket mounting bolts.
5. Depress the locking tab and rotate the speed control cable cap to remove.