Mountaineer AWD V8-4.6L SOHC VIN W (2002)
3. Install the bolt and washer. Using the special tool to hold the crankshaft pulley, tighten the bolt in four stages.
-
Stage 1: Tighten to 90 Nm (66 ft. lbs.).
-
Stage 2: Loosen the bolt.
-
Stage 3: Tighten to 50 Nm (37 ft. lbs.).
-
Stage 4: Tighten an additional 90 degrees.
4. Position the lower radiator shroud and install the bolts.
5. Attach the lower radiator hose from the two clips.
6. Lower the vehicle.
7. Install the drive belt.
8. Install the engine cooling fan.
