mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

ABOUT US
Transmission Mount, A/T|Specifications|Page 7336 > < Transmission Mount, A/T|Specifications|Page 7334

Mountaineer AWD V8-4.6L SOHC VIN W (2002)

Page 4
background image

4. Install the LH side crossmember bolts.

5. Install the plastic fuel pump connector cover to the right side of the frame rail.
6. Install the plastic shield on the right side of the crossmember near the fuel tank.

7. NOTE:  The RH side is shown, LH side similar.

Install the two upper crossmember bolts (two on each side).

8. Tighten the rear transmission support nuts.

Transmission Mount, A/T|Specifications|Page 7336 > < Transmission Mount, A/T|Specifications|Page 7334