Mountaineer AWD V8-4.6L SOHC VIN W (2002)
Wiper Arm: Service and Repair
Wiper Pivot Arm - Front
WIPER PIVOT ARM - FRONT
Removal and Installation
1. NOTE: The windshield wiper pivot arms are repaired as an assembly.
Remove the wiper pivot arm.
1. Pull up on the pivot arm.
2. Pull out on the retainer tab and remove the pivot arm.
2. NOTE: The windshield wiper motor must be cycled to make sure that it is in the park position. If necessary, adjust the wiper pivot arms.
To install, reverse the removal procedure.