Mountaineer AWD V8-4.6L VIN 8 (2006)
Brake Rotor/Disc: Service and Repair
Disc Removal and Installation, Rear
Brake Disc
Material
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. CAUTION: Do not pry in the caliper sight hole to retract the pistons, as this can damage the pistons and boots.
CAUTION: Do not allow the brake caliper and brake pad assembly to hang from the brake hose or damage to the hose can occur.
Remove the 2 brake caliper bolts, position the caliper and pads aside as an assembly.
^
Support the caliper and brake pad assembly using mechanic's wire.
3. NOTE: If the brake disc binds on the parking brake shoe and lining, remove the adjustment hole knockout panel or access plug and contract the
parking brake shoe and lining.
NOTE: If the brake disc cannot be removed easily, apply penetrating lock lubricant on the brake disc-to-hub mating surfaces.