Mercury Workshop Service and Repair Manuals > Mountaineer RWD V6-4.0L (2008) > Transmission and Drivetrain | Drive/Propeller Shafts, Bearings and Joints | Drive/Propeller Shaft | Component Information | Service and Repair | Driveshaft - Front

Page 1

Drive/Propeller Shaft: Service and Repair
Driveshaft Slip Yoke Boot

Driveshaft Slip Yoke Boot

Removal

1. Remove the driveshaft.
2. Index mark the driveshaft on both sides of the driveshaft slip yoke boot.

Mercury Workshop Service and Repair Manuals