mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Engine - Camshaft Timing Procedure|Page 2150 > < Compression Check|Specifications
Page 1
background image

Camshaft Gear/Sprocket: Technical Service Bulletins
Engine - Camshaft Timing Procedure

Article No.
96-1-5

01/02/96

ENGINE - 2.0L - ENGINE TIMING PROCEDURE - SERVICE TIP

FORD: 
1995-96 CONTOUR

LINCOLN-MERCURY: 
1995-96 MYSTIQUE

ISSUE: 
When setting camshaft timing on the 2.0L Zetec engine, there is the possibility of improperly setting the timing to the wrong mark on the crankshaft
damper.

ACTION: 
When setting camshaft timing on these vehicles refer to the following Service Procedure to correctly set engine timing.

SERVICE PROCEDURE

1.

Rotate the crankshaft clockwise so that the SECOND timing mark in rotation on the crankshaft damper is aligned with the raised mark on the oil
pan as shown in Figure 1. The engine is now at Top Dead Center (TDC) No. 1 cylinder.

Engine - Camshaft Timing Procedure|Page 2150 > < Compression Check|Specifications