mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Key Cylinder Lamp|Service and Repair|Page 8635 > < Interior Lighting Relay|Locations|Page 8631
Page 1
background image

Key Cylinder Lamp: Service and Repair

REMOVAL

1. Remove the door trim panel.

2. Remove the door watershield.

^

Using a plastic knife, cut through the Butyl strips to enable the watershield to be peeled back.

CAUTION:  Do not touch the adhesive surface as re-bonding will be impaired. Do not attempt to peel the watershield from the door without
cutting the Butyl strip.

3. Release the tang and remove the switch before removing from the bracket.

CAUTION:  Do not move switch past the vertical, as damage may result.

4. Remove the wiring harness from its retainers.

Key Cylinder Lamp|Service and Repair|Page 8635 > < Interior Lighting Relay|Locations|Page 8631