mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Accumulator/Drier to Evaporator Line|Page 1141 > < Accumulator/Drier to Evaporator Line
Page 2
background image

7. Remove the bracket of the air conditioning system line.

8. Bend the retaining plate open and the position line aside.

^

Lower the vehicle.

9. Pull out the air conditioning line clamps.

10. Use the special tool, disconnect the line from the evaporator.

^

Remove the suction accumulator to evaporator A/C line.

NOTE:  Seal the line and the evaporator with plugs.

INSTALLATION

Accumulator/Drier to Evaporator Line|Page 1141 > < Accumulator/Drier to Evaporator Line