mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Electronic Returnless Fuel|Page 3763 > < Electronic Returnless Fuel
Page 2
background image

7. Disconnect the Intake Manifold Runner Control (IMRC) operation rod.

8. Remove the fuel supply manifold.

Note:  The fuel injection supply manifold and fuel injectors are removed as an assembly.

9. Remove the fuel injectors from the supply manifold.

Installation

WARNING:  DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR
ANY FUEL RELATED COMPONENTS. HIGHLY FLAMMABLE VAPORS ARE ALWAYS PRESENT AND MAY IGNITE. FAILURE TO
FOLLOW THESE INSTRUCTIONS MAY CAUSE PERSONAL INJURY.

Electronic Returnless Fuel|Page 3763 > < Electronic Returnless Fuel