Mystique V6-153 2.5L DOHC VIN L SFI (1999)
Installation
1. NOTE: If a new power steering pump assembly is being installed the fittings that are supplied with the new power steering pump assembly should
be removed and saved for future use.
Using the special tool, install a new O-ring seal.
1
Push the new O-ring seal onto the tool.
2
Locate the tool on the union and push on the new O-ring seal.
2. install the power steering line union.
3. Install the power steering pump and retaining plate.
4. NOTE: Do not fully tighten the bolts until the accessory drive belt is installed.