Mystique V6-153 2.5L DOHC VIN L SFI (1999)
Tie Rod End: Service and Repair
OUTER TIE ROD END
Removal
1. Raise and support vehicle.
2. Loosen the tie-rod end locknut and retaining nut.
1
Loosen the locknut.
2
Remove the retaining nut.
3. CAUTION: When the tie-rod end is separated from the wheel knuckle the ball joint should be protected to prevent damage.
Using the special tool, release the tie-rod end from the wheel knuckle.
4. NOTE: Make a note of the number of turns required to remove the tie-rod end.
Remove the tie-rod end and locknut.
