Mystique V6-153 2.5L DOHC VIN L SFI (1999)
Seals and Gaskets: Service and Repair
Special Tool(s)
Removal
1. Remove the halfshaft.
2. Remove the differential seal (left-hand side shown, right-hand side similar).
Installation
1. Use Differential Drive Shaft Seal Replacer T94P-7025-H and Driver Handle T80T-4000-W to install the new differential seal.
^
Lubricate seal with Automatic Transmission Fluid
2. NOTE: Always install a new driveshaft bearing retainer circlip.
Install the halfshaft.