Mystique V6-153 2.5L DOHC VIN L SFI (1999)
5. Remove the high mount stop lamp cover.
1. Push in the high mount stop lamp cover tabs.
2. Remove the high mount stop lamp cover.
6. Disconnect the high mount stop lamp electrical connector.
7. Cut around the heated rear window glass using the Oscillating Cutter No. 107-R1511 fitted with a 24 mm hooked blade.
WARNING: WEAR GLOVES AND EYE PROTECTION WHEN WORKING WITH THE GLASS CUTTING TOOL AS THE
CUTTING OPERATION MAY PRODUCE SPLINTERS. WHEN USING THE CUTTER WEAR EAR PROTECTION. FAILURE TO
FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
NOTE: If a heated rear window is to be re-installed, make sure the cutter blade is kept low when cutting in the area of the heated rear window
connectors.
