Sable V6-182 3.0L (1986)
14.
Obtain a new lock knob bezel with the added spring, new rivet 382568-S2 and flat washer 372901-S2 for each door trim panel, Figure 4. Refer to
the parts application chart on page 13 of this TSB.
15.
Using the new bezel as a guide, align it to the door trim panel and drill a 1/8" (3 mm) hole in the door trim panel, Figure 4.
16.
Repeat Step 15 for the three (3) remaining door trim panels.
17.
Position the bezel in the trim panel with the flat washer on the backside of the trim panel and install the rivet, Figure 4.
