Sable V6-182 3.0L (1986)
Figure 3
2.
Separate front seat back trim cover at "J" retainers. (Figure 3)
Figure 4
3.
Refer to Figure 4 and fabricate a tool used for the headrest removal.
NOTE:
Only one shaft per headrest has a retainer spring.
Figure 3
2.
Separate front seat back trim cover at "J" retainers. (Figure 3)
Figure 4
3.
Refer to Figure 4 and fabricate a tool used for the headrest removal.
NOTE:
Only one shaft per headrest has a retainer spring.