Sable V6-182 3.0L (1986)
Figure 2
Removal/Installation
See Figure 2.
1.
Open luggage compartment door and remove lower back panel trim-to-cover assembly.
2.
Remove (2) screw and washer assemblies attaching the luggage compartment striker assembly.
3.
Install new striker assembly (part number E6DZ- 54404B42-B). Cycle luggage compartment door so that latch to striker is properly aligned.
4.
Adjust striker position as necessary to assure positive latching. (Torque screws to 9-14 N-m.)