Sable V6-182 3.0L (1986)
Figure 2
6.
Insert two (2) valve boby guide pins T86P-70100-A as shown in Figure 2.
7.
Install two (2) torx bolts. Tighten the the two (2) torx bolts to a torque of 7-9 ft.lbs. (9-12 N-m).
Figure 3
8.
Position the valve body on the oil pump. Use a new gasket.
9.
Insert pump body guide pin T86P-70370-A and valve body guide pin T86P-70100-C as shown in Figure 3.
10.
Install two (2) valve-body-to-oil-pump retaining bolts. Tighten the the two (2) bolts to a torque of 7-9 ft.lbs. (9-12 N-m).
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS:
INFORMATION ONLY
OASIS CODES:
5100, 5200