Sable V6-182 3.0L (1986)
Fig. 7 Inner Race Removal & Installation
7.
Push down on CV joint inner race until it tilts enough to allow ball removal, Fig. 5. If inner race is tight, it can be tilted by tapping inner race
with wooden dowel and hammer. Do not hit cage.
8.
Remove balls from cage. If balls are tight, use blunt screwdriver to pry balls from cage.
9.
Pivot cage and inner race assembly until its straight up, Fig. 6. Align cage windows with outer race lands while pivoting bearing cage, then lift out
cage and inner race.
10.
Rotate inner race up and out of cage, Fig. 7.
Fig. 7 Inner Race Removal & Installation
Fig. 10 Inner Race & Cage Assembly