mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Antenna, Phone|Sedan|Page 11609 > < Antenna, Phone|Sedan|Page 11607
Page 1
background image

Antenna, Phone: Service and Repair
Wagon

NOTE:  Use available Service Kit 18814 to replace mobile phone antenna.

REMOVAL

1. Disconnect multi-function control antenna cable from inner base of mobile telephone antenna .
2. Cut two-way tape retaining inner base to glass. To remove base, pull by hand. Do not pry on glass.
3. Remove radio antenna mast from outer base of mobile telephone antenna.
4. Cut two-way tape retaining outer base to glass. To remove base, pull by hand. Do not pry on glass.

INSTALLATION

1. Clean two-way tape from inside and outside of glass.
2. Remove protective covering from two-way tape on inner base of mobile telephone antenna and attach antenna base to glass.

Antenna, Phone|Sedan|Page 11609 > < Antenna, Phone|Sedan|Page 11607